The PAS68/K12 Crash Hydraulic Bollard CHB600 automatic bollards have been designed to ensure a high level of security for anti terrorist applications.
The result of over 25 years in the specific design and manufacture of automatic bollards, the PAS68/K12 Crash Hydraulic Bollard CHB600 is recommended for use in a variety of sites where hostile vehicle mitigation is required.
PAS68/K12 Crash Hydraulic Bollard
Model: CHB600
Descriptions
GS anti-ram Crash bollards combine an open aesthetic appearance with the highest level of perimeter control. These crash tested bollards provide free movement of pedestrians and are available in a variety of operating configurations. Utilizing the highest cycle duties available, the GS anti ram crash rated security bollards are an economical and effective way of protecting any entry.
Beneifts
Specifications
Cylinder Material | AISI 304 Stainless Steel or Mild Steel & Powder Coating |
Cylinder Diameter | 220mm |
Cylinder Height | 600mm |
Cylinder Thickness | 6mm for stainless steel or mild steel |
Cylinder Finish | (Stainless Steel) Brushed or Powder Coating |
Reflective Stripe | 55mm |
Rising Speed | 20cm/sec |
Lowering Speed | 35cm/sec |
Safety Pressure Switch | Yes |
Emergency Lowering | Yes |
Connection Cable to Control Unit | 4M (Max 80M) |
Hydraulic Pump | Built Into hydraulic Bollard |
Grade of Protection | IP67 suitable for outdoor |
Life Average | 5,000,000 – 2000/Day |
Impact Resistance | 30,000J |
Breakout Resistance | 150,000J |
Operating Temperature | -40C +60C |
Control
PLC control board,leakage switch, no exposure to noise high life contactor and other precise time-starting device( prevent the impact of the oil cylinder in place after movement and increase the service life of it.
hydraulic controller: control box, remote controller,manual button. Those are controlled by the personnel on duty.
Production